Beam and photoelectron interactions in positron storage rings
K. Ohmi
Phys. Rev. Lett. 75, 1526 (1995).

Possible head-tail oscillation of bunches due to a transverse feedback kicker
E. Kikutani
Part. Accel. 52, 251 (1996).

Single beam collective effects in the KEK B factory
Y.H. Chin
Part. Accel. 50, 133 (1995).

Beam test of a transverse beam oscillation monitor for multibunch beam feedbabck system in the KEKB
K. Hanaoka
KEK Report 95-13 (1995).

Design report on PF injector linac upgrade for KEK
I. Sato et al. (edit.)
KEK Report 95-18 (1995).

Design of a transverse feedback system against multibunch beam oscillation due to impedance in the KEK B factory rings (in Japnese)
K. Hanaoka
KEK Report 95-10 (1995).

Crab cavity for KEKB
K. Hosoyama
Gif-sur-Yvette 1995, p. 671 (1995).

Superconducting accelerating cavity for KEK B factory
T. Furuya et al.
Gif-sur-Yvette 1995, 729 (1995).

Stable performance of 508-MHz superconducting rf cavities for KEK B factory
K. Asano et al.
Gif-sur-Yvette 1995, p. 419 (1995).

PAC95

KEKB status and plans
S. Kurokawa
Proceedings of IEEE PAC95, p. 486 (1995).

Development of HOM damper for B factory (KEKB) superconducting cavities
T. Tajima et al.
Proceedings of IEEE PAC95, p. 1620 (1995).

Development of a HOM damped cavity for the KEK B factory (KEKB)
T. Kageyama et al.
Proceedings of IEEE PAC95, p. 1759 (1995).

Beam-based alignment of sextupoles with the modulation method
M. Kikuchi et al.
Proceedings of IEEE PAC95, p. 603 (1995).

Control system design for KEKB accelerators
T. Katoh et al.
Proceedings of IEEE PAC95, p. 2205 (1995).

Single beam collective effects in the KEK B factory
Y.H. Chin et al.
Proceedings of IEEE PAC95, p. 3085 (1995).

Impedance budget for the KEK B factory
Y.H. Chin and K. Satoh
Proceedings of IEEE PAC95, p. 3082 (1995).

An accelerator resonantly coupled with an energy storage (ARES) for the KEKB
Y. Yamazaki et al.
Proceedings of Proceedings of IEEE PAC95, p. 1503 (1995).

Design of the KEKB rf syustem
K. Akai et al.
Proceedings of IEEE PAC95, p. 1735 (1995).

RF characteristics of ARES cold models
N. Akasaka et al.
Proceedings of IEEE PAC95, p. 1738 (1995).

Feasibility study of an orbit feedbafck system for the KEK B factory
Y. Funakoshi et al.
Proceedings of IEEE PAC95, p. 2521 (1995).

Recent progress in the development of the bunch feedback systems for KEKB
E. Kikutani et al.
Proceedings of IEEE PAC95, p. 2726 (1995).

Lattice design for KEKB colliding rings
H. Koiso and K. Oide
Proceedings of IEEE PAC95, p. 2780 (1995).

A study of beam-beam interactions at finite crossing angles for a B factory
K. Hirata et al.
Proceedings of IEEE PAC95, p. 2883 (1995).

HOM abosrber for the KEKB normal conducting cavity
Y. Takeuchi et al.
Proceedings of IEEE PAC95, p. 1797 (1995).

Input coupler for the KEKB normal conducting cavity
F. Naito et al.
Proceedings of IEEE PAC95, p. 1806 (1995).

Linac upgrade plan for the KEK B factory
A. Enomoto et al.
Proceedings of IEEE PAC95, p. 216 (1995).

Experiment of the RF feedback using a parallel comb filter
S. Yoshimoto et al.
Proceedings of IEEE PAC95, p. 2675 (1995).

Testing coaxial switches of BPM using a high-resolution rf detector
T. Ieiri et al.
Proceedings of IEEE PAC95, p. 2566 (1995).

Damped button electrode for B-factory BPM system
T. Obina et al.
Proceedings of IEEE PAC95, p. 2613 (1995).

Recent progress in the development of the bunch feeddback systems for KEKB
E. Kikutani et al.
Proceedings of IEEE PAC95, p. 2726 (1995).

KEKB B-Factory Design Report
KEK Report 95-7.

KEKB bunch feedback systems
M. Tobiyama and E. Kikutani
Proceedings of International Workshop on Collective Effects and Impednace for B Factrories (CEIBA95) p. 470 (1995).

A coupled bunch instability due to beam photoelectron interactions in KEKB-LER
K. Ohimi
Proceedings of International Workshop on Collective Effects and Impednace for B Factrories (CEIBA95) p. 288 (1995).

RF feedback for KEKB
E. Ezura
Proceedings of International Workshop on Collective Effects and Impednace for B Factrories (CEIBA95), p. 437 (1995).

Bellows design and testing for KEKB
Y. Suetsugu
Proceedings of International Workshop on Collective Effects and Impednace for B Factrories (CEIBA95) p. 189 (1995).

Pumping slot design for KEKB LER
K. Kanazawa
Proceedings of International Workshop on Collective Effects and Impednace for B Factrories (CEIBA95) p. 163 (1995).

Impedance and collective effects in the KEKB
Y.H. Chin and K. Oide
Proceedings of International Workshop on Collective Effects and Impednace for B Factrories (CEIBA95) p. 1 (1995).

Status of the KEKB accelerator controlsyustem development
T. Katoh et al.
Proceedings of ICALEPCS95, (1995).

Integration feasibility of the existing linac control system and the ring EPICS system at KEKB
K. Furukawa et al.
Proceedings of ICALEPCS95, (1995).

Present status of the KEKB project
S. Kurokawa
Proceedings of 10th Symposium of Accelerator Science and Technology, p. 20 (1995).

Beam test of the rf feedback for KEKB in TRISTAN MR
S. Yoshimoto et al.
Proceedings of 10th Symposium of Accelerator Science and Technology, (1995).

Development of a bellows assembly with an rf-shield for the KEKB
S. Yoshimoto et al.
Proceedings of 10th Symposium of Accelerator Science and Technology, p. 91 (1995).

Development of a two-tap filter for bunch-by-bunch feedback systems
M. Tobiyama et al.
Proceedings of 10th Symposium of Accelerator Science and Technology, p. 278 (1995).

Design of a beam-postion monitor circuit for the KEKB injector
Y. Hosono et al.
Proceedings of 10th Symposium of Accelerator Science and Technology, p. 428 (1995).

Rf characterisitcs of the bullet shape SiC abosrber for KEKB
Y. Takeuchi et al.
Proceedings of 10th Symposium of Accelerator Science and Technology, p. 70 (1995).

Design of magnet power supplies for KEKB accelerator
T. Kubo et al.
Proceedings of 10th Symposium of Accelerator Science and Technology, p. 118 (1995).

Vacuum design of KEKB
K. Kanazawa et al.
Proceedings of 10th Symposium of Accelerator Science and Technology, p. 197 (1995).

Beam test of the rf feedback for KEKB in TRISTAN MR
S. Yoshimoto et al.
Proceedings of 10th Symposium of Accelerator Science and Technology, p. 341 (1995).

Measurement of photon stimulated gas desoption coefficients of copper beam ducts
Y. Suetsugu et al.
Proceedings of Ultra high vacuum thchniques for accelerator and storage rings, p. 137 (1995).

The status of PF injector upgrade for KEKB (in Japanese)
I. Sato and Injector group
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 100 (1995).

Pre-injecter of the KEKB linac and its performance (in Japanese)
S. Ohsawa et al.
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 103 (1995).

Acceleration of high-current, single-bunched beam (in Japanese)
Y. Ogawa et al.
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 106 (1995).

Design of the bunching system of the KEKB linac
J-Y. Choi et al.
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 182 (1995).

Coupler design for the S-band accelrator guides (in Japanese)
Y. Igarashi et al.
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 194 (1995).

Cooperation in control systems of KEKB linac and ring (in Japanese)
K. Furukawa et al.
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 221 (1995).

Mechanical design of the new screen monitor
T. Suwada et al.
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 245 (1995).

Wire-scanner beam-profile monitor for the KEKB injector -(I) (in Japanese)
Y. Otake et al.
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 251 (1995).

BPM electronics for the KEKB injector (in Japanese)
H. Kobayashi et al.
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 254 (1995).

Design and manufacturing the 60-kW klystron driving the 50-MW klystron for KEKB (in Japanese)
S. Fukuda
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 293 (1995).

An rf monitor system for KEKB linac (in Japanese)
H. Katagiri et al.
Proceedings of the 20th Linear Accelerator Meeting in Japan, p. 296 (1995).