Design of the vacuum system for KEKB
H. Hisamtsu et al.
Vacuum 47, 601 (1996).

Beam-beam tails simulation for KEK B facotry
D. Shatilov
KEK Report 96-14 (1996).

Fabrication of a copper chamber for a storage ring with boached inner surface
T. Kobari et al.
Vacuum 47, 605 (1996).

Bellows design and testing for KEKB
Y. Suetsugu et al.
Vacuum 47, 629 (1995).

EPAC96

Quasi strong-strong simulation for beam-beam interactions in KEKB
K. Ohmi et al.
Proceedings of EPAC96, p. 1164 (1996).

Development of a high-speed digital signal-process board for the KEKB bunch feedback systems
T. Tajima et al,
Proceedings of EPAC96, p. 2127 (1996).

HOM absorber of superconducting cavities for KEKB
E. Kikutani and M. Tobiyama
Proceedings of EPAC96, p. 1893 (1996).

A coupled bunch instability due to beam -photoelectron interaction s in positron starage rings
K. Ohmi et al.
Proceedings of EPAC96, p. 1969(1996).

RF Issues for High Intensity Factorries
K. Akai
Proceedings of EPAC96 p. 205 (1996).

The ARES cavity for the KEK B facotry
T. Kageyama et al.
Proceedings of EPAC96, p. 2008 (1996).

The SiC absorber for the KEKB ARES cavity
Y. Takeuchi et al.
Proceedings of EPAC96, p. 2020 (1996).

Development of a bellows assembly with rf-shield for KEKB
Y. Suetsugu et al.
Proceedings of EPAC96, p. 1072 (1996).

Experiment of RF Feedback using an improved Parallel Comb-filter
S. Yoshimoto et al.
Proceedings of EPAC96, p. 1899 (1996).

Development of a bellows assembly with rf-shield for KEKB
K. Kanazawa and Y. Suetsugu
Proceedings of EPAC96, p.1072 (1996).

Super conducting magnet system for KEKB B factory
K. Tsuchiya et al.
Proceedings of EPAC96, p. 2287 (1996).

Test operation of the pf linac rf system upgraded for the KEKB injector
H. Hanaki et al.
Proceedings of EPAC96, p. 2003 (1996).

Design of HOM power absorbers for the KEK B factory
Y.H. Chin et al.
Proceedings of EPAC96, p. 2000 (1996).

The input coupler for the KEKB ARES cavity
F. Naito et al.
Proceedings of EPAC96, p. 2014 (1996).

Quadrupole counter mixing choke structure for the KEKB ARES cavity
N. Akasaka et al.
Proceedings of EPAC96, p. 1997 (1996).

Beam-loading issues and requirements for the KEKB crab rf system
K. Akai and Y. Funakoshi
Proceedings of EPAC96, p. 2118 (1996).

Tuning control and transient response of the ARES for KEKB
K. Akai et al.
Proceedings of EPAC96, p. 1994 (1996).

Design of beam position monitor system for KEKB
N. Akasaka et al.
Proceedings of EPAC96, p. 1672 (1996).

The superconducting magnet system for KEKB B-factory
K. Tsuchiya et al.
Proceedings of EPAC96, p. 2287 (1996).

The KEK B factory and the Belle detector
T. Nozaki (for Belle collaboration)
Nulc. Phys. Proc. Suppl 50, 288 (1996).

Higher order mode (HOM) characteristics fo the choke mode cavity for the KEK B factory (KEKB)
T. Kobayashi
Proceedings of EPAC96, p. 2074 (1996).

A systematic study of a transverse feedback system with a two-tap filter
Y. Minagawa et al.
Proceedings of EPAC96, p. 1896 (1996).

Bunching system of the KEKB linac
Jae-Young Choi et al.
Proceedings 18th International Linac Conference, p. 340 (1996).

Upgrade to the 8-GeV electron linac for KEKB
A. Enomoto
Proceedings 18th International Linac Conference p. 633 (1996).

Performance of the rf source for the KEKB linac
S. Fukuda et al.
Proceedings 18th International Linac Conference, p. 187 (1996).

The present stauts of the KEKB project
S.I. Kurokawa
Proceedings of EPAC96, p. 448 (1996).

A prototype module of a superconducting damped cavity for KEKB
T. Furuya et al.
Proceedings of EPAC96, p. 2121 (1996).

Beam based alignmnet of sextupole magnets with a pi bump orbit
N. Yamamoto et al.
Proceedings of EPAC96, p. 962 (1996).

Beam based measurement of strength erros in quadrupole magnets with orbit bumps
H. Koiso et al.
Proceedings of EPAC96, p. 956 (1996).

Development of beam position detection electonics of the KEKB injector linac
T. Suwada et al.
Proceedings of BIW96, p. 324 (1996).

Optimization of dynamic aperture for the KEKB B-factory
K. Oide et al.
Proceedings of Computational Acceleerator Physics Conference, p. 215 (1996).

Development and test results of the prototype active shield dipole magnets for the KEKB
K. Tsuchiya et al.
IEEE TRans. Magnetics 32 2120 (1996).

Present status of the PF 2.5-GeV Linac (in Japanese)
H. Kobayashi and Injector Linac Group
Proceedings of the 21st Linear Accelerator Meeting in Japan, p. 7 (1996).

Trigger system of the KEKB linac (in Japanese)
T. Urano et al.
Proceedings of the 21st Linear Accelerator Meeting in Japan, p. 201 (1996).

Energy-spread estimation for KEKB injector linac (in Japanes)
T. Kamitani et al.
Proceedings of the 21st Linear Accelerator Meeting in Japan, p. 204 (1996).

Operation of KEKB linac and ring wit EPICS (in Japanese)
M. Kaji and K. Furukawa
Proceedings of the 21st Linear Accelerator Meeting in Japan, p. 207 (1996).

Improvement of the KEK linac controlsystem towards KEKB (in Japanese)
K. Furukawa et al.
Proceedings of the 21st Linear Accelerator Meeting in Japan, p. 210 (1996).

Fabrication of the S-band accelerator guideas for KEKB injector (in Japanese)
Y. Igarashi et al.
Proceedings of the 21st Linear Accelerator Meeting in Japan, p. 213 (1996).