Source |
- 2.5GeV PF Short Gap uUndulator
|
Optics |
- Monochtomator (Fix-exit double crystal Si(111), liquid nitrogen cooling)
- Horizontal collimation bent flat mirror (Rh coated)
- Horizontal focusing double 16-element bimorph mirror (Rh coated)
- Vertical focusing bent flat mirror (Rh coated)
- Double flat mirror (Ni coated) for higher harmonics reduction: using Tender X-ray
|
Energy range |
- 2.1 - 15 keV (0.93 - 5.9 Å)
|
Resolution (ΔE/E) |
|
Beam size |
- H 0.55 x V 0.09 mm2 at a sample position in camera length of 1.5 m.
- H 0.29 x V 0.04 mm2 at a sample position in Tender X-ray SAXS experiments.
|
Photon flux |
- 2 x 1011 photons/s @ 10.2 keV
|
Instruments |
- Camera length:0.25, 0.5, 1.5, 2.5, 3.5 m(SAXS)
- Camera length:0.95, 1.2, 2.2, 3.2 m (When using WAXS chamber)
- PD embedded beam stopper/GISAXS beam stopper
- Delay pulse generator
- Chiller for sample temperature adjustment (5 - 70 °C)
- Incubator (3 - 45 °C)
- Block incubator (4 – 100 &Cring;、1.5ml, 0.5 ml tube)
- Microcentrifuge (1.5, 0.5 ml, -20 – 40 °C)
- Perista pump
- Sample solution flow system for mitigating the effect of radiation damage.
- Rotary Sample Changer (36 samples)
- HPLC system for SEC-SAXS
- Microspectrophotometer (~ 2 μL)
【Common instruments:BL-6A、BL-10C、BL-15A2】
- General GISAXS stage
- Heating/Cooling stage:10002L(Linkam scientific、-190 - 600 °C), HSC302-LN190(Instec、-190 - 400 °C)
- One-dimensional tensile tester (ISUT-2207、IS GIKEN)
- DSC stage(AA1712-1303、Rigaku)
|
Detectors |
- SAXS : PILATUS3 2M (DECTRIS AG)
- 1D WAXS : PILATUS3 300K-W (DECTRIS AG)
- 2D WAXS : PILATUS 300K (DECTRIS AG) *Under installation
|
Remote / Mail-in |
- Remote experiment using some instruments is available (Please consult with beamline contact person).
|
Special notes |
- A flat card detector (C9728DK-10, Hamamatsu Photonics) is also available as a 2D WAXS detector.
|