News

The dedicated beamline “C-Line” for the COMET experiment has been successfully completed at the J-PARC research facility in Tokai village, Ibaraki  prefecture. This beamline supplies proton beams used in the generation of muon beams for the COMET experiment. By extracting pulsed proton beams with an energy of 8 giga-electron volts (GeV) from the accelerator and irradiating them onto the pion production target, the experiment has achieved successful testing. The generated pions are transported to the experimental laboratory through the muon beamline, where they are confirmed to decay into muons.

The COMET (COherent Muon to Electron Transition) experiment is an international collaborative project aimed at discovering new physic beyond the Standard Model (SM) of elementary particle physics using muons. In 2018, the extraction of the proton beams from the J-PARC main ring to the hadron experimental facility was achieved, but at that time, the existing beamline called “A-Line” was utilized, which did not allow for the measurement of muons generated through the pion decay produced in the backward required for the COMET experiment. With the completion of the dedicated beamline “C-Line” designed for the COMET experiment, the measurement of muon beams required by COMET has become possible for the first time.

At the J-PARC, The COMET experiment is searching for the coherent neutrinoless conversion of muons into electrons in the field of a nucleus (called “muon-electron conversion,”) which is extremely unlikely, the estimated probability of an occurrence is approximately one in 100 trillion. According to the SM, the muon will decay to produce an electron with two neutrinos. Alternatively, some may be captured by the nucleus, emitting a neutrino in the process. In these cases, the total number of each flavor of lepton does not change; this is called Lepton Flavor Conservation. However, the “muon-electron conversion” involves the muon converting into an electron without emitting neutrinos, violating this conservation rule. If muon-electron conversion can be found, it is undoubtable evidence of new physics beyond the standard model.

The COMET Collaboration employs a staged approach for the COMET experiment, “COMET Phase-I” and “COMET Phase-II.” However, before stepping forward to these stages, a preliminary phase named “Phase α(Alpha)” was conducted to measure the secondary particles supplied through the beamline.While the primary objective of the COMET experiment is to investigate muon yields and their momentum distributions, various other particles also reach our detectors. In Phase α, the primary goal was to identify these additional particles and study their in-flight characteristics. Following Phaseα, the COMET experiment will commence full-scale experimental preparations to explore the “muon-electron conversion,” which is the main purpose of the physics measurements. Dr. Wataru Oishi from Imperial College London, who has been involved in the COMET experiment for nearly a decade since his student days, expressed his joy at the completion of the COMET beamline, which has been designed over many years. He said, “It is an indescribable feeling to see the culmination of our efforts, which has been done through a continuous series of small-scale tests.”

A straw tube detector was also installed for the first time in the laboratory, located in a radiation-controlled area. This is an ultra-low mass charged particle track detector installed upstream of the electromagnetic calorimeter for the beam measurement in the COMET experiment. It will be utilized for momentum measurements of electrons and particle identification.

In conjunction with the construction of the new beamline, a new device called the range counter has been installed in the laboratory. Developed by Shion Kuribayashi, a graduate student at Osaka University, this detector is designed to identify charged particles that arrive at the beamline and estimate their momentum.

Generated in large quantities by the accelerator, the pions decay into muons during their flight to the laboratory, and then the muons either decay into two neutrinos and a electron or get captured by atomic nuclei, emitting one neutrino. The proportions of these particles are determined by analyzing experimental data and utilizing simulation data. The COMET Collaboration actively involves graduate students and young researchers in detector fabrication, data collection, and data analysis to foster talent capable of designing new experiments while learning the fundamentals of particle physics.

Associate Professor Hajime Nishiguchi, who has been involved in the COMET experiment since obtaining his doctorate degree in 2008, expressed his satisfaction with the results of the trial run, stating, “We have finally reached this point. With the completion and demonstrated performance of the dedicated beamline for the COMET experiment, we are now entering the final stages of experiment preparation as we move towards the actual experiment.”

The COMET experiment continues to work on the development of facilities, detectors and analysis in the wake of physics data aquisition, to shed some light on the most fundamental aspects of physics.